CeraShield Mallorca Spain

TERMS PDF

OUR PRODUCTS

10 MICRON CERAMIC COATING FOR YACHTS

Long lasting, transparent, easy to clean and maintain coating

PRODUCT INFORMATION

Properties

  • Restores and seals faded paint and gel coat
  • Forms a gas barrier which protects against soot and exhaust emissions
  • High gloss
  • Excellent adhesion to most substrates
  • High UV and chemical resistance
  • Economical
  • Easy to apply
  • 1 year warranty
  • If required easily removed with its own specially formulated removal gel

Description

10 Micron Ceramic Coating protects non-absorbent surfaces, based on patented technology. 10 Micron Ceramic Coating forms a permanent barrier layer that bonds chemically with the substrate and cures at atmospheric temperature. The surface protected with 10 Micron Ceramic Coating can be cleaned repeatedly without reapplying the product.

Use

10 Micron Ceramic Coating is particularly suitable for smooth, non-absorbent surfaces, such as one or two component paints (polyurethane or epoxy systems), polyester paints, GRP surfaces, aluminium and stainless steel surfaces.

PRODUCT APPLICATION / TOOLS

10 Micron Ceramic Coating is supplied ready to use. 10 Micron Ceramic Coating is applied with a West System roller and microfiber applicators. Vessels do not require tenting and applications can be done with the yacht either on the hard standing or berthed in a marina.

Technical Data

  • Appearance:      colourless clear liquid
  • Density:               ca. 0.97 g/cm3
  • Solid Content:     60% – 90%

Application Instructions

The product should be applied by trained CeraShield applicators only. Test on a small area or apply a test coat before application.

CLEANING

Surfaces coated with 10 Micron Ceramic Coating can be cleaned with normal boat soap in the pH range 3 – 12 range. Strong (mineral) acids or alkalis should be avoided and are also unnecessary as neutral cleaners are sufficient to clean surfaces coated with 10 Micron Ceramic Coating.

Removal

10 Micron Ceramic Coating can easily be removed using our specially formulated removal gel. This gel does not affect paint and gel coats. The gel gently breaks down the ceramic resin in the clear coat leaving the underlying surface ready to be sanded normally prior to a repainting programme. This process is quick and easy.

Do You Have Question? Contact Us