OUR PRODUCTS
7 MICRON CERAMIC COATING AND POLYMER NON-CERAMIC COATING
Long lasting, transparent, easy to clean and maintain coating
PRODUCT INFORMATION
Properties
- Restores and seals faded paint and gel coat
- Forms a gas barrier which protects against soot and exhaust emissions
- High gloss
- Excellent adhesion to most substrates
- High UV and chemical resistance
- Economical
- Easy to apply
- If required easily removed
Description
7 Micron Ceramic Coating and Polymer Non-Ceramic Coating protects non-absorbent surfaces, based on a patented technology. 7 Micron Ceramic Coating and Polymer Non-Ceramic Coating forms a permanent barrier layer that bonds chemically with the substrate and cures at atmospheric temperature. The surface protected with 7 Micron Ceramic Coating and Polymer Non-Ceramic Coating can be cleaned repeatedly without reapplying the product.
Use
7 Micron Ceramic Coating and Polymer Non-Ceramic Coating is particularly suitable for smooth, non-absorbent surfaces, such as one or two component paints (polyurethane or epoxy systems), polyester paints, GRP surfaces, aluminium and stainless steel surfaces.
PRODUCT APPLICATION / TOOLS
Depending on the substrate 7 Micron Ceramic Coating and Polymer Non-Ceramic Coating can be applied using a wipe on wipe off method. Vessels do not require tenting and applications can be done with the vessel either hard standing (in the yard) or berthed in a marina.
Technical Data
- Appearance: colourless clear liquid
- Density: ca. 0.93 g/cm3
- Solid Content: 20% – 60%
Application Instructions
The product should be applied by trained CeraShield applicators only. Test on a small area or apply a test coat before application.
CLEANING
Surfaces coated with 7 Micron Ceramic Coating and Polymer Non-Ceramic Coating should be cleaned with cleaners in the pH range 3 – 12. Strong (mineral) acids or alkalis should be avoided and are also unnecessary as neutral cleaners are sufficient to clean surfaces coated with 7 Micron Ceramic Coating and Polymer Non-Ceramic Coating.
