CS10 MICRON CERAMIC COATING

Long lasting, transparent, easy to clean and maintain coating.

INFORMATION

Two men are painting the hull of a boat with a yellow roller brush, one wearing sunglasses and a red life vest, the other smiling in the background, both in white shirts and black gloves.

  • Product Information

    10 Micron Ceramic Coating protects non-absorbent surfaces, based on patented technology. 10 Micron Ceramic Coating forms a permanent barrier layer that bonds chemically with the substrate and cures at atmospheric temperature. The surface protected with 10 Micron Ceramic Coating can be cleaned repeatedly without reapplying the product.

  • PROPERTIES

    • Restores and seals faded paint and gel coat

    • Forms a gas barrier which protects against soot and exhaust emissions

    • High gloss

    • Excellent adhesion to most substrates

    • High UV and chemical resistance

    • Economical

    • Easy to apply

    • 1 year warranty

    • If required easily removed with its own specially formulated removal gel

  • USE

    10 Micron Ceramic Coating is particularly suitable for smooth, non-absorbent surfaces, such as one or two component paints (polyurethane or epoxy systems), polyester paints, GRP surfaces, aluminium and stainless-steel surfaces.

APPLICATION

Side view of a large white luxury yacht docked at a marina, with black fenders hanging over the side and water visible at the bottom.

  • PRODUCT APPLICATION

    10 Micron Ceramic Coating is supplied ready to use. 10 Micron Ceramic Coating is applied with a West System roller and microfiber applicators. Vessels do not require tenting and applications can be done with the yacht either on the hard standing or berthed in a marina.

  • TECHNICAL DATA

    • Appearance:      colourless clear liquid

    • Density:               ca. 0.97 g/cm3

    • Solid Content:     60% – 90%

  • APPLICATION INSTRUCTIONS

    The product should be applied by trained CeraShield applicators only. Test on a small area or apply a test coat before application.

MAINTENANCE

A man cleaning the roof of a solar panel with a hose, standing barefoot on the panels which are clean and shiny.

  • Maintenance

    Surfaces coated with 10 Micron Ceramic Coating can be cleaned with normal boat soap in the pH range 3 – 12 range. Strong (mineral) acids or alkalis should be avoided and are also unnecessary as neutral cleaners are sufficient to clean surfaces coated with 10 Micron Ceramic Coating.

  • REMOVAL

    10 Micron Ceramic Coating can easily be removed using our specially formulated removal gel. This gel does not affect paint and gel coats. The gel gently breaks down the ceramic resin in the clear coat leaving the underlying surface ready to be sanded normally prior to a repainting programme. This process is quick and easy.

Contact for a Quote