7 MICRON CERAMIC COATING

Long lasting, transparent, easy to clean and maintain coating.

INFORMATION

Close-up of a white yacht's exterior reflecting nearby boats and structures at a marina, with a person walking on a platform near the water.

  • Product Information

    7 Micron Ceramic Coating protects non-absorbent surfaces, based on a patented technology. 7 Micron Ceramic Coating forms a permanent barrier layer that bonds chemically with the substrate and cures at atmospheric temperature. The surface protected with 7 Micron Ceramic Coating can be cleaned repeatedly without reapplying the product.

  • Properties

    • Restores and seals faded paint and gel coat

    • Forms a gas barrier which protects against soot and exhaust emissions

    • High gloss

    • Excellent adhesion to most substrates

    • High UV and chemical resistance

    • Economical

    • Easy to apply

    • If required easily removed

  • Use

    7 Micron Ceramic Coating and Polymer Non-Ceramic Coating is particularly suitable for smooth, non-absorbent surfaces, such as one or two component paints (polyurethane or epoxy systems), polyester paints, GRP surfaces, aluminium and stainless steel surfaces.

APPLICATION

A collage showing a yacht reflected in a shiny surface, and two hands holding a digital device displaying measurements of 5.6 and 95.4.

  • PRODUCT APPLICATION / TOOLS

    Depending on the substrate 7 Micron Ceramic Coating can be applied using a wipe on wipe off method. Vessels do not require tenting and applications can be done with the vessel either hard standing (in the yard) or berthed in a marina.

    The product should be applied by trained CeraShield applicators only. Test on a small area or apply a test coat before application.

  • Technical Data

    • Appearance:      colourless clear liquid

    • Density:               ca. 0.93 g/cm3

    • Solid Content:     20% – 60%

  • APPLICATION INSTRUCTIONS

    The product should be applied by trained CeraShield applicators only. Test on a small area or apply a test coat before application.

MAINTENANCE

People working on a yacht docked at a marina, with their reflection visible on the yacht's shiny surface.

  • Maintenance

    Surfaces coated with 7 Micron Ceramic Coating should be cleaned with cleaners in the pH range 3 – 12. Strong (mineral) acids or alkalis should be avoided and are also unnecessary as neutral cleaners are sufficient to clean surfaces coated with 7 Micron Ceramic Coating.

  • Our CS 7 Micron coating is designed to deliver lasting protection while still being manageable to work with. It can be safely polished away when it’s time for reapplication of surface refinishing. This ensures flexibility for yacht owners and captains, while maintaining the premium finish Cerashield is known for.